April 2025 – LostGeek.NET

Installing Virt-Manager on Debian Without Backend Dependencies

VirtManager
I run several virtual machines on a home server, and this setup works out quite well for a couple of reasons. First, the VMs can run tasks at any time without slowing down the machine I’m actively working on. Second, Virt-Manager is a pretty slick solution—it gives you access to local LXC containers, QEMU virtual machines, or even lets you connect to VMs on another server over SSH.

If you’re just looking for the front-end functionality of Virt-Manager, you might find this interesting: you don’t need to install all the QEMU and libvirt daemon packages!

On Debian Bookworm, when I try to install Virt-Manager, it tells me it’s going to install 107 new packages, using about 220MB of disk space. Now, that’s not a ton of space, but it is quite a few packages. So let’s try a leaner approach:

That only pulls in 22 packages, using around 25MB of disk space.

For those who don’t know, the --no-install-recommends option in apt tells it to skip non-essential (recommended) packages when installing software. It still grabs everything needed to run the software, but skips the extras that apt thinks most people might want. Usually, that’s fine—Debian actually splits packages pretty aggressively (and sometimes annoyingly so).

For example, you’ve probably noticed that nearly every package with development tools also has a separate -dev version. Or maybe you’ve seen how xscreensaver is split into four separate packages, even though it’s distributed as a single application by its author.

Oh, and unless you’re exclusively using serial consoles through libvirt, you’ll probably want SPICE support working too! That means installing a couple more packages—just over 2MB extra:

sudo apt install libspice-client-gtk-3.0-5 gir1.2-spiceclientgtk-3.0

Let those install with their normal dependencies and recommended packages—otherwise the SPICE graphical interface won’t function correctly.

Anyway, remember that --no-install-recommends trick—it’ll definitely come in handy someday!

OpenBSD 7.7 Released Today!

Happy to see that OpenBSD 7.7 is officially released! What’s new? More than I’ll even try to list here. Well… that’s a lie! I’ve got to mention some of it.

Personally, I was definitely pleased to see amongst the changes there are lots of kernel improvements. Many SMP enhancments, New AMDGPU hardware supported, as-well as Intel Arrow Lake. Perhaps post exciting is they’ve updated DRM to Linux 6.12.21. Also
acpipci now active on hypervisors, resolving longstanding SeaBIOS/qemu issues

Ten highlights from the 7.7 Release include:

Enabled AP power state initialization fix for M1 MacBook on latest firmware.
Implemented support for ARM64 SVE (Scalable Vector Extension).
Added AMD SEV guest boot support on QEMU with EFI and SEV firmware management via psp(4).
Unlocked TCP output, timers, and accept(2) — significantly improving SMP scalability and parallelism for TCP workloads.
Updated Direct Rendering Manager (drm(4)) to Linux 6.12.21, with new hardware support for AMD Ryzen AI 300, Navi 48 GPUs, and Intel Arrow Lake.
Improved out-of-memory (OOM) handling and made page daemon operations more efficient.
Implemented per-CPU ringbuffers for dt(4) and extended btrace(8) with additional units and multiline script support.
Introduced kern.audio.kbdcontrol sysctl(2) to optionally treat multimedia keyboard volume keys as regular keys.
Allowed sysctl(8) to apply settings from a file in one command with -f, simplifying rc(8) startup.
Enabled shared netlocks for TCP send/recv system calls — improving multi-threaded network performance.

https://www.openbsd.org/77.html

I disable zram every time I install Fedora

ZRam
If you do a quick search online, you’ll find plenty of discussions where people ask about turning off zram—for one reason or another. They’re often met with a barrage of comments saying they’re making things worse. “Zram is free performance, didn’t you know? It costs nothing and doubles your RAM!”

Yeah, well—hear me out.

My desktop has 16 GB of RAM. I don’t even get close to running out of memory unless it’s been up for 30 days straight with 100 different apps or browser tabs open. My newer ThinkPad has 8 GB.

Now, 8 GB isn’t considered a large amount of memory anymore. In fact, people will tell you it’s rapidly becoming the bare minimum. But I’ll tell you this: for most people’s needs, especially on a laptop, it’s plenty. I don’t tend to have much open on my notebook—just a couple of browser windows, a few terminals, email, maybe a file manager. Any more than that and I start feeling lazy, because odds are I’m not really using all that stuff. I tend to be more focused when I close down things I’m not actively using.

Anyway, back on topic—why don’t I use zram?

My machines are all 8 years old, or older. They work just fine, but they are not new.

My desktop has a 4th-gen Intel chip, and my laptop runs a 5th-gen low-voltage i5. Zram does give you “more memory,” but it comes at a cost. It works by compressing unused memory pages, which means your CPU has to do that work. Every time a page is written to zram or read back out, it must be compressed or decompressed.

Whether or not that impact is that noticeable, I can’t say for sure—I haven’t run benchmarks. But I do know this: my machines are fast enough, and I like to keep them light, fast, and nimble. And since I already have enough RAM, it makes no sense for me to use zram. If I do need to swap, all of my systems have fast SSDs to handle swapping well enough. I typically allocate 1–4 GB of swap space, and I do that on the fastest SSD in the system.

If you’ve got multiple drives—say, NVMe, SATA SSD, and a spinning hard drive—only put your swap on the NVMe. Another tip: if you’re not planning to hibernate, there’s no reason to make your swap as large as your RAM. Swap is useful as a safety net so your system doesn’t lock up when you run out of memory, but in my experience, I’ve rarely used more than 1 GB. If you’re consistently using multiple gigabytes of swap, you probably just need more RAM.

Another argument I often see is: “Zram doesn’t consume extra memory.” Well… how does that make any sense? Of course it does. Sure, it’s compressed—maybe you use 500 MB of RAM for what would’ve been 1 GB of swap—but I’d rather use that 500 MB as actual RAM and just let the system swap to SSD.

If you want to disable zram on Fedora, just create an empty config file called zram-generator.conf and place it in /etc/systemd/.

You can even do this from the live installer, while it’s still copying data. Just pop open a terminal and run:

That’s it!

ben.lostgeek.net/code

To keep things clean and organized

I’ve put most of the code I’ve shared here all up in one place. Everything has a .txt extension, so it can just be viewed in the browser, copied and pasted. There are some readme files, but they are minimal… and this is just a start; but a start is better than nothing.

Simple Paint program for Linux?

Ever miss the easy, simpler times?

TLDR; That screenshot isn’t of jspaint.app — but with the exception of trading the blue titlebar for your web browser’s UI; it is basically the same thing. I stumbled upon jspaint.app while looking for a basic, simple Linux\Unix paint program.

Genuinely useful, I would say. For when you need to just draw a circle, a dot, an arrow to draw attention to part of a screenshot. When you need to do a simple resize, rotate, crop. And of course, it can save and open files from your local machine. The uploading and downloading is mimicked through the win32 inspired dialog, it even plays a Win 9x error warning chime to remind you to save upon quitting! And I’ll be damned, I wrote this whole thing up not knowing that there is much much more, if you Exit the “program” instead of just closing the tab. Some very cool stuff. Definitely will scratch the nostalgia itch, but genuinely useful too.

Anyways, that was the main point of this; sharing something I thought was pretty cool and unique. Despite being a copy of something, I’d imagine it is a complete re-implementation, and probably took some serious programming chops to pull off so cleanly. As far as I can see, it has full feature parity with the mspaint in Windows 95 – XP. (in my opinion, the best version.)

But, my search continued. I want something installed on the system, I’m not into web apps — but I made an exception to share that. It’s pretty darn neat. Both Krita and GIMP are fantastic image editing applications, but they’re packed to the gills with features. Most of the time, yes that is a great thing. But sometimes, it simple isn’t needed. Both applications take at least 5 – 10 seconds to start up, and if you haven’t worked in them in a while it can feel a bit cumbersome finding your way through whatever edits you’re trying to make as you re learn the interface and layout. I’m a casual user. If I the software daily, I’d have no complaints.

In my 5 minute search to see what was out there I found a few things of interest…

Pinta looked like a great option. However, you need to install Microsoft’s .NET SDK in order to compile it yourself. It isn’t already in the debian repositories of course either. They did have a tarball of it, I’ll probably go back and try that… but I ended up moving in. Yes, they had flatpacks and snaps, I’m all set since I have no other software in the format thus far and ehh, I just prefer more minimalist solutions.

I ended up installing Dibuja; had to of course do some terminal funkery but wasn’t too bad. Basically there was a dependency issue with libgdk-pixbuf, I installed the current replacement but apt wasn’t happy with that… However it was an easy fix, equivs came to the rescue.

First off, we install the updated library libgdk-pixbuf-2.0-0. Go ahead and try just installing the .deb for Dibuja because my issues may have been because I’m running on trixie… I doubt it though, but not sure. If you have dpkg complain that you’re missing libgdk-pixbuf, continue on to install equivs.

For those in the same pickle as I was:

mkdir ~/equivs-dibuja
cd ~/equivs-dibuja
equivs-control control

Open control in an editor and add the following:

Package: libgdk-pixbuf2.0-0
Version: 2.22.0
Provides: libgdk-pixbuf2.0-0
Description: Fake package to satisfy dibuja

Then run equivs-build control. Install by running sudo dpkg -i libgdk-pixbuf2.0-0_2.22.0_all.deb

Now… we try installing Dibuja again…

As you can see, quite simple. No layers, unicorn shaped brush tips, flatsnaps, just a good BASIC image editor.

My thoughts on Arch Linux

Preface: I’m a long-time GNU/Linux user, extensively familiar with systems like Debian and Fedora. I don’t mind getting my hands dirty, and I’ve used plenty of distributions that are generally believed to be less user-friendly than your average Ubuntu flavor — namely Alpine Linux, FreeBSD, and OpenBSD.

So, what is Arch Linux, and who is it for?

If I had to answer that myself and offer my own take, it would be this: Arch is a rolling-release distribution with the latest packages and a remarkably broad selection of software. You’ll have at your fingertips the very latest in Linux and free software — you’ll be on the bleeding edge.

Arch is also a build-it-yourself kind of distro, in the sense that you’ll need to choose and configure your own desktop environment, sound server, display server, and so on. It’s more popular than ever among Linux power users, and it’s easy to see why.

How does it compare to Debian Sid? Fedora Rawhide?

First, let’s clear up a common point of confusion: when people say “Sid,” they often mean Debian Testing. Testing is the middle ground between Unstable and Stable in the Debian ecosystem. Typically, it won’t have broken packages — though it can — but it may be missing them entirely at times.

Unstable, on the other hand, does hold buggy, broken, in-development software. Testing is for software that’s somewhat stable and functioning, but not yet officially “release-ready.”

Debian does a new “Stable” release (a major version, e.g., Bookworm) roughly every two years. When new packages are built, they first enter “Unstable,” and once they work well enough, they move to “Testing.” Leading up to a new release, a freeze occurs. During the freeze, new code and features are no longer accepted into Testing — only bug fixes are allowed. This model prioritizes stability, and it’s similar to how the Linux kernel is developed: features freeze at a certain point, so that the remaining effort is focused on polishing what’s already there.

For completeness: Fedora takes a similar approach, but it’s simpler in terms of branches. They have the latest official release (e.g., Fedora 41), and then there’s Rawhide, which is Fedora’s rolling-release/unstable branch.

Wait… I thought this was supposed to be about Arch Linux?!

I’m getting back to that.

So where does Arch fall into all this? Well, Debian Stable — Arch is not. And by that, I mean they’re completely different animals.

Sometimes, you want something that’s tried and true, something that just works. There’s nothing wrong with Debian’s release model — in fact, Debian is one of the most widely used Linux distributions on desktops, and it’s arguably even more dominant on servers.

Right now, for example (April 2025), Debian 12 Bookworm is almost two years old. That means that, for the most part, the software it includes is also about two years old. Some packages may be even older. This doesn’t mean the software is bad, but it’s technically “old.” Features don’t normally change during a stable release’s lifecycle — only security updates and critical bug fixes are provided.

In contrast, Arch gets you as close to the upstream as possible. Things should work, but they haven’t been battle-tested the same way. Debian Stable, on the other hand, continues to be supported even after it’s no longer the current release — with bug fixes and security updates maintained under its “Old Stable” status. These days, a single Debian release can easily be used for up to eight years or more.

When does Arch Linux make the most sense?

If you’ve got a brand-new, cutting-edge piece of hardware, Arch might be the most sensible choice. You’ll likely want the latest Linux kernel for full support — and yes, you can build a new kernel on any distro, but we’re not talking about that level of work here.

Because Arch combines a bleeding-edge model with a huge package repository, you can choose to run either the latest stable kernel or an LTS (Long-Term Support) kernel, depending on your preference. For context: when we say “stable” in terms of the Linux kernel, we don’t mean “stable” like Debian Stable — we just mean it’s a non-development, non-RC release.

If you have a high-DPI display, a high-end GPU, or you just want to test the latest in GNOME or KDE, Arch is a fantastic choice. As I mentioned earlier, you’ll be able to install much more recent builds of almost everything than what you’d find in something like Debian Stable.

Why not just use Debian Testing or Sid, then?

You can, and if you’re already comfortable with Debian, trying out Testing isn’t a bad idea. In fact, Testing can often be run day-to-day without major issues. But Sid (Unstable) is another story entirely — and if you try to mix packages from Stable, Testing, and Unstable, you’re very likely to run into messy dependency hell and package management headaches.

While Testing can function as a sort of rolling release, that’s not really its purpose. It exists primarily for development and staging of Debian’s next Stable version. Arch, on the other hand, is a rolling release — plain and simple. If a package is in the repository, it’s supposed to work. And if something breaks, you can usually roll it back, and a fix will likely come soon.

In conclusion…

Well — I haven’t come to one yet, and I can’t say there will be a definitive conclusion, per se.

As I write this, I’m on my second or third day of giving Arch a good, honest trial on my laptop. So far, I’m liking it quite a bit. I’ll no doubt have a follow-up at some point, but I think I’ve stated the majority of my opinions up above.

Stay tuned.

Massive Speed-Upgrade for your Linux infrastructure with AptCacherNG

Cache Diagram — AptCacherNG makes it easy to create a local cache of Debian package mirrors.

If you’ve got multiple machines running the same distribution, APTCacherNG allow for effortless caching of software packages.

I run various distributions, but Debian is probably near the top of that list. Between virtual and physical boxes, I probably have a dozen running Debian. Seriously.

Now, between different versions and architectures you obviously can’t reuse the same packages always; but you don’t need to worry about that. This is something you set up, and then can basically forget about.

Chances are, most instances of your OS are going to be the same version (the current stable release), and the same architecture – usually AMD64.

Not only can you save a ton of bandwidth, but you benefit even more so from the speed up. My internet is about 300 Mbps give or take, but my lan is much faster. The machine I use for caching has nvme storage set aside for the task, and thus is only limited by the speed of the network interface. Even with 1GB, I think you’ll notice a tangible improvement.

It isn’t just for Debian.

Nope, it actually can work with basically anything. I’ve gotten it to work on Alpine with no real effort. I think I may have had to change a line in the config, but it is quite easy.

Under the hood, this is really just web caching. Your clients route their requests through one central machine. Since all requests go through one server, that machine can say “Oh, I just downloaded that for so-and-so an hour ago… here you go!” and forgo an internet download in favor of re-sending the cached copy.

Good for you, you’ll see speed increase no doubt. If you have limited bandwidth, It would be worth doing for even just one or two clients. If you have more than half a dozen or so, I’d say it is a no brainier. It also lowers the strain on the mirrors, which is a good thing too — Especially if you’re in charge of taking care of a whole rack of servers, or perhaps a lab / classroom full of machines.

It’s Easy!

On the clients you have a couple options. For a fresh net-install of Debian, when you go to select the country for your mirror, you want to scroll all the way to the bottom (or top?) and you’ll find “Enter Manually”. Here, you simply furnish your aptcacherng host. In my case, “novo.lan:3142”. Then, just like with debian’s mirror, the rest of the url is the same.

For existing installs, open up /etc/apt/sources.list and replace ftp.debian.org or deb.debian.org with yourmachine.lan:3142 — don’t forget to specify that port. By default, it runs on 3142.

Learn more: https://wiki.debian.org/AptCacherNg

New FOSS Releases for April 2025

FOSS NEWS — April 2025

Figured I’d try something new and cover a few topics at once in a sort of, monthly roundup! We’re midway through April, so this will go over what’s happening this month and shortly thereafter. Naturally, focusing on the projects I am personally most interested in.

Fedora 42 – Releasing April 15th (Tuesday!)

42? The answer to life, the universe and more?? Its not even out yet, at the 42 refrences are already wearing a little thin for me, hah. None the less, Fedora 42 comes out this coming Monday. Some points of interest:

New Anaconda Web UI Installer provides an enhanced, intuitive interface.
Python 3.8 Retirement – Python 3.8 has reached EOL status
KDE Plasma – Now a full-fledged desktop option, not just a “spin” flavor. The KDE special interest group has been working on integrating the latest Plasma applications and testing them for ensured stability.

Debian 13 Trixie – Freeze Timeline

I’ve been running Trixie on my desktop for a few months now, and because it is so close to freeze I have recently decided to put it on my X1 Carbon as well. So far, everything has been fantastic.

Transition and Toolchain Freeze – March 15th (Done)
Soft Freeze – April 15th (This coming Monday)
Hard Freeze – May 15th

The final release date for Debian Trixie is yet to be announced, but it is expected to be around June or August of this year.

Major changes in Debian 13:
Trixie will use the 6.12 LTS kernel
KDE Plasma 6
Addition of official RISC-V 64-bit support
Dropping support for the mipsel architecture
Removal of i386 & armel installers

Ubuntu 25.04 Plucky Puffin

The 25.04 (non-LTS) release of Ubuntu will release on April 17th, with 9 months of standard support.

Plucky Puffin will feature:
Gnome 48 – Improved responsiveness and a new “wellbeing feature”
Wayland continues as default display server
Compiler optimization level changed from -02 to -03 – Aiming to boost execution speeds and performance
Linux Kernel 6.14
ZFS and BTRFS Optimizations – Atomic updates and rollbacks inspired by NixOS are now supported
New Security Center dashboard – Centralized firewall, update and vulnerability management.
Chrony updated for encrypted time sync
Netplan Enhancments now supporting WPA-PSK-SHA256 wifi

The release candidate came out two days ago, and we’ll see the final release on Thursday the 17th.

FreeBSD 14.3 – Releasing in June

I’m definitely looking forward to this release, and we should be seeing BETA releases next month. Final release is scheduled for June 3rd.

14.3 will introduce support for 32-bit UEFI systems; benefiting users with older 32 bit EFI systems which have 64 bit CPUs. Updates to storage controller and network interface drivers are also in the works.

WiFi Improvements
Intel WiFi driver enhancements have been a goal; improving the iwlwifi(4) driver, addressing bugs and adding hardware crypto support.
Work has been done on porting the iwx driver over from OpenBSD to enable 802.11ac and 802.11ax functionality. This driver supports the Intel AX200, AX210 and AX201/AX211 adapters.

The 14.x series has been nothing shy of Impressive when it comes to performance, and I have no doubts that 14.3 will continue to deliver on that front.

VMware Workstation Continues to Impress

Yesterday I was quite surprised just how painlessly I was able to get a snappy, usable XP VM up and running in VMware Workstation.

To be clear, running XP in a VM is nothing special nor is it hard to do. But having decent graphics acceleration and device drivers is another story! I’m a true believer in the FOSS philosophy, but so long as there aren’t ads or nag screens I don’t mind using proprietary software so long as it works well.

Just for fun, I thought I’d see how VMware Workstation handles Windows 98 SE. I was surprised indeed.

Display properties, with high resolutions and color depths available

Unreal Tournament Demo v348 seemed a good test, at only 49MB. VMware set this machine up with the venerable AMD PCNET card, so 98SE found it during setup and I didn’t have to do anything — it just worked. I did need to install an old version of the guest tools; I found that on archive.org and have uploaded it to my own server aswell. Will link below.

UTDemo — UT99 drawing > 200 FPS with the software renderer

The game didn’t find a 3D accelerator, or offer DirectX / OpenGL but you could probably get that working. Nearly 250 FPS with software rendering isn’t too bad though!

I’m not interested in the VMware solution for games though, but rather old desktop applications that don’t run stably under wine. For those curious, Unreal Tournament runs PERFECTLY under wine! So that’s definitely how I’d recommend playing it. I just wanted to see how well VMware Workstation worked for something a little more demanding than MS Office. And yeah, its solid!

VMware Tools ISO for 9x / NT/ 2k / XP:
https://archive.org/details/winPreVista

EDIT 04/13/25: I didn’t realize this initially, but the tools did not install an audio driver. VMWare emulates Ensoniq AudioPCI hardware for the 9x guest; amazingly creative still hosts the driver on their site.

Creative/Ensoniq Audio Driver:
https://support.creative.com/downloads/download.aspx?nDownloadId=259

Running Windows XP in a VM (April 2025)

I run Linux obviously… and sometimes Wine blows my mind with how good it is. I have several cases lately however, where my mind isn’t exactly… blown…

This was going to be a guide on running VirtualBox 6.0.24 on Debian testing. TLDR; VMWare Workstation is Free for Linux, and is probably a much better idea anyway. Still though, wanted to document the journey.

So… XP as a guest has not been supported by any of the major virtualization solutions for years at this point. Now sure, you can install and run XP just fine on any of them… but 3D acceleration for smooth desktop operation is another story. Today, I’m going to see just how much of a pain in the ass that is – getting a 2019 VirtualBox packaged for Debian Buster… running on Debian Trixie (testing) in 2025.

SPOILER: This didn’t work; if you’re determined though, I’m sure you could get it working. This will get you Vbox installed, and the application runs, but you can’t actually run a VM… in my case anyway. I have a mismatch of Sid/Trixie/Bookworm though, and generally that is bad practice 🙂 See the alternate solution… just scroll down a bit.

If you try and just go for it, you’ll be met in the very least with a message informing you that you system lacks these dependencies:

dpkg: dependency problems prevent configuration of virtualbox-6.0:
virtualbox-6.0 depends on libssl1.1 (>= 1.1.1); however:
Package libssl1.1 is not installed.
virtualbox-6.0 depends on libvpx5 (>= 1.6.0); however:
Package libvpx5 is not installed.
virtualbox-6.0 depends on python (<< 2.8); however:
Package python is not installed.
virtualbox-6.0 depends on python (>= 2.7); however:
Package python is not installed.
virtualbox-6.0 depends on python:any (>= 2.6.6-7~).

You’ll need an older libssl package. libssl1.1_1.1.1n-0+deb10u6_amd64.deb is easily found on Debian’s site, there will be a link at the end of the article too. For me, a simple dpkg -i installed this with 0 problems… So far, so good!

For libvpx5:
wget http://ftp.debian.org/debian/pool/main/libv/libvpx/libvpx5_1.7.0-3+deb10u1_amd64.deb

sudo dpkg -i libvpx5_1.7.0-3+deb10u1_amd64.deb

Now, Python… obviously Python 2 is dead. I first tried this with the python-is-python3 package; I wish this would have worked. The backup plan is installing Python 2.7 from Bullseye, which I’d have liked to avoid.

Steps for Python 2.7…

Download http://ftp.debian.org/debian/pool/main/libf/libffi/libffi7_3.3-6_amd64.deb
dpkg -i libffi7_3.3-6_amd64.deb

If you’re running as root, you can save time with a single command for the download / install. Here is the next thing we’ll need:

wget http://ftp.debian.org/debian/pool/main/p/python2.7/libpython2.7-minimal_2.7.18-8+deb11u1_amd64.deb && dpkg -i libpython2.7-minimal_2.7.18-8+deb11u1_amd64.deb

For the next two, I had to tell it to ignore a dependency. “mime-support” is no longer a package, and I have the new version installed, so this should be OK.

Wget http://ftp.debian.org/debian/pool/main/p/python2.7/libpython2.7-stdlib_2.7.18-8+deb11u1_amd64.deb && sudo dpkg -i –force-depends libpython2.7-stdlib_2.7.18-8+deb11u1_amd64.deb

Again, we have to do that for the actual Python 2.7 package

wget http://ftp.debian.org/debian/pool/main/p/python2.7/python2.7_2.7.18-8+deb11u1_amd64.deb && dpkg -i –force-depends python2.7_2.7.18-8+deb11u1_amd64.deb

At this point, I removed python-is-python3, since we don’t want to be trying to run python2 code on python3 when we have 2.7 installed; so apt remove –purge python-is-python3

VirtualBox will still complain about missing python. Oh well. Use the Force!

sudo dpkg -i –force-depends virtualbox-6.0_6.0.24-139119~Debian~buster_amd64.deb

At this point, Virtualbox was indeed installed however there were problems finishing the setup. Something to do with the kernel modules, maybe the vbox networking, stuff like that. EVERY TIME I used apt, I had to –fix-broken install which REMOVED virtualbox. Then I had to reinstall it, telling it to ignore the python situation. The problem looked related to kernel modules \ lack of kernel headers installed so I made sure I had those installed. Anyway, big f’n mess.

I figured I’d share because for someone determined enough, you’ll probably get it working. At this point, VirtualBox does indeed start, you can start to configure a VM, etc. Just when you try to actually launch a VM, it will complain and fail.

Alternate Solution:

But guess what…. There is a major VM solution that supposedly still supports accelerated graphics on XP. VMWare Workstation – which at the time of writing this – is completely free. You just need to sign up with your email, but no credit card or any BS like that.

You’ll need an older version of the VMWare Guest Tools:
https://packages.vmware.com/tools/releases/10.0.12/windows/

Just download the ISO, and after you install XP you can mount it and the installer should start right up. Reboot and you should be good.

IE Downloading

Man… Been a while since I’ve seen THAT dialog box! Mainly because I used XP for years with FireFox.

The LostGeek Weblog

Month: April 2025